SY5133THB-9018C-6S
  • SY5133THB-9018C-6S
  • SY5133THB-9018C-6S

SY5133THB-9018C-6S

9018 Line Pump

Theo. delivery pressure:
9/18MPa
Theo.concrete output:
100/55m³/h
Engine Power:
180kW/2200rpm
  • Advanced hydraulic system; Intelligent control system; Efficient pump system; Energy-saving technology

01 Durability & Reliability

NAS 1638 Class 7 Hydraulic Oil Means Clean Oil

Strictly controlling cleanliness during production, SANY achieves NAS 1638 class 7 hydraulic oil cleanliness before our machines are shipped. The filtration and maintenance intervals of our products designed to maintain this level of cleanliness during operation. Cleaning the hydraulic oil from NAS class ility and durability.

Built-in style oil pump is installed near switch to ensure of stable signal

Excellent anti-interference performance improves stability of system.

Intelligent control system with excellent trouble free performance

The control system consists of a SANY developed SYMC controller and that uses CAN bus communication technology. A completely enclosed wiring harness and user friendly operator display ensure trouble free performance.

02 Wear Parts With Long Service Life

Wear plate, cutting ring

SANY's patented dual ring split type alloy structure prevents the alloy coating from crumbling and separating. Our long service life wear plates can withstand 50,000 to 60,000 cubic meters concrete. The cutting ring can be used for 20,000 to 30,000 cubic meters concrete before being replaced.

Piston

Adopting German rubber piston technology has provided excellent abrasion performance and resistance to heavy stress and high temperatures. Our pistons can pump 25,000 to 30,000 cubic meters concrete before replacement.

Cylinder

Integrating precision machining and electroplating technology from Germany enables the cylinder to pump 100,000 to 140,000 cubic meters of concrete before being replaced.

03 Low Maintenance Cost

High viscosity index, wide temperature range anti-wear hydraulic oil is chosen for its outstanding stability and suitability to different regions and temperature ranges. The change interval of this oil is double that of standard hydraulic oil.

Exceptionally performing wear parts

Integrating leading edge technology from Germany and China has significantly extended the life cycle of our wear parts. Our world class assembly line achieves a 99.9% pass rate for these parts.

Concrete pump cylinder with large diameter

Concrete pump cylinder diameter extends to 230mm, reducing abrasion of concrete piston and prolonging its life cycle.

04 Energy Conservation And Low Fuel Consumption

Self regulating power technology

Engine Speed and power regulated based on the load on the main pump, leading to a fuel savings of up to 20%

SN reversing technology

SN reversing technology provides a short reversing cycle time. This improves pumping efficiency and reduces fuel consumption.

05 Efficiency and Convenience

Brand new hopper

Optimized inner chamber of hopper ,enhancing absorbing capacity for different types of concretes.

Fast pumping speed

Short reversing time, pumping speed is 15% faster than competitors

Piston auto return technology

Concrete piston is able to return to the water tank automatically when maintenance required.

High and low pressure auto switching technology

The switch between high and low pressure pumping can be realized via one-key operation, easy to operate and without leaking or contamination.

06 Intelligent Control System

Intelligent fault diagnostic system

The intelligent control system monitors the machine for over 200 faults in real time. Faults are displayed on the monitor. Review of the faults can reduce troubleshooting time by 70%.

Smart control panel

The smart control panel is user friendly, displaying sensor signals in an easy to understand format.

Exclusive motion controller for pumping

Entirely different from conventional motion controllers, the SANY controller integrates the pumping algorithm with an onboard database. The result is faster operation and superior performance.


Dimensions
Overall length
9240 mm
Overall width
2470 mm
Overall height
3090 mm
Gross weight
12855 kg
Pumping System
Max. concrete output(theoretical)-Low pressure
100 m³ / h
Max. concrete output(theoretical)-High pressure
55 m³ / h
Max. delivery pressure(theoretical)-Low pressure
9 Mpa
Max. delivery pressure(theoretical)-High pressure
18 Mpa
Pumping times(theoretical)-Low pressure
25 times/min
Pumping times(theoretical)-High pressure
14 times/min
Delivery cylinder Bore
230 mm
Delivery cylinder Stroke
1600 mm
Hopper capacity
0.6 m³
Rated power of upper engine
180 kW
Chassis
Chassis model
SANY SYM1161T
Engine model
ISDe180 40
Engine power
132 kW
Engine max.net power
126.2 kW
Emissions
China stage Ⅳ
Fuel tank capacity
300 L
Displacement
4.5 L
Max. speed
90 km/h
LEAVE A MESSAGE

Submit Now!