SRC600C
  • SRC600C
  • SRC600C

SRC600C

60 t Rough Terrain Crane

Max Lifting Capacity:
60 t
Max Boom Length:
43.9m
Overall Weight:
44900kg
  • 5-Section U-shaped boom adopts high strength structural steel

Excellent performance

Key structural optimization, improve the product performance. Over-length boom and high tensile steel U-sharped boom, which allows for decreased boom weight and increased boom strength. Two-axle off-roader chassis, four-wheel driving, four-steering modes have good mobility.

Energy and High efficiency

The load sensitive variable displacement piston pump is applied to adjust the pump displacement in real time with little energy loss during operation. The dead-weight luffing compensation hydraulic system is applied to ensure good micro-mobility and excellent stability. The four-wheel steering control system is applied to ensure four individual steering modes with flexible operation. The dual-circuit braking system is applied with individual brakes for front and rear wheels and pressure maintained by an accumulator, providing good braking effect. Slewing and steering circuits are controlled by a priority valve, providing priority for steering control and ensuring the stability and rapid response of slewing action.

Safety and Reliable

Load moment limiter: The system can provide comprehensive protection for the lifting operation and will alarm if the crane is overloaded, guaranteeing operation safety. A three-wrap rope protector is applied to both main and auxiliary winches to prevent over rolling[1]out of wire rope. A height limiter is applied at both boom and jib ends to prevent over-hoisting of the wire rope. Equipped with length sensor, angle sensor and press sensor to indicate the working condition of whole crane in real-time, giving an alarm and cutting off the dangerous action automatically. Use high-quality axle, engine, gearbox, hydraulic pump and hydraulic motor etc. key parts, improve the reliable of product.

Capacity
Max. lifting capacity
60t
Dimensions
Overall length
14100mm
Overall width
3300mm
Overall height
3760mm
Axle distance
4000mm
Weight
Overall weight
44900kg
Front axle load
24800kg
Rear axle load
20100kg
Engine
Model
Cummins
Rated power
210kw/2500rpm
Rated torque
970N.m/1500rpm
Emission standard
T3i
Traveling
Max. traveling speed
40km/h
Min.turning radius
12.9/7.4m
Min. ground clearance
513mm
Approach angle
22°
Departure angle
17°
Max. gradeability
75%
Main Performance
Temperature range
-20°-46°
Boom section
5
Boom shape
U-shaped
Max. lifting moment-Base boom
2115kN.m
Max. lifting moment-Full-extend boom
1100kN.m
Max. lifting moment-Full-extend boom+jib
530kN.m
Length-Base boom
11.3m
Length-Full-extend boom
43.9m
Length-Full-extend boom+jib
59.5m
Outrigger span(Longitudinal/Transversal)
7.4/7.5m
Jib offset
0°15°30°
Working Speed
Max. single rope lifting speed of main winch(no load)
155m/min
Max. single rope lifting speed of auxiliary winch(no load)
155m/min
Full extend/retract time of boom
95/110s
Full raise/lower time of boom
55/75s
Swing speed
2.6r/min
Aircondition
LEAVE A MESSAGE

Submit Now!