STC1000S
STC1000S
STC1000S
STC1000S
STC1000S
  • STC1000S
  • STC1000S
  • STC1000S
  • STC1000S
  • STC1000S
  • STC1000S
  • STC1000S
  • STC1000S
  • STC1000S

STC1000S

100 tons Truck Crane

Max. Lifting Capacity:
100t
Boom Length:
56m
Overall Weight:
46000kg
  • All wheel steering
  • Multiple braking modes

Sany STC1000S truck crane uses electric proportional variable displacement piston pump to ensure high--accurate flow control, higher efficiency and energy saving. Jib mounting angles are 0°, 15°, and 30°, which ensure fast and convenient change-over between different operating conditions so as to improve working efficiency of the machine.

Powerful Lifting Capacity

The 100 ton truck crane has six-section boom of high strength steel structure and optimized U-shaped cross section with max.lifting capacity of 100t, full-extended boom length of 56m, jib length of 15.5m, max.lifting height including jib of 77.5m, reduce weight and improve safety significantly.

Efficient & Unique Hydraulic System

Self-developed dual-pump converging / diversion main valve is used. Converging flow of the single-action dual-pump ensures fast operation and high efficiency; combined-action dual-pump diversion system is applied to ensure stable controllability.

Excellent Traveling Performance

The first 100t-class crane use 4-axle chassis with overall weight of 46t, which is the lightest crane of similar class cranes; multiple braking modes and all axles steered design ensure more agile and reliable traveling performance; the use of tipping over early-warning technology guarantees high stable and safe operation.

Intelligent Electronic Control

Self-developed controller SYMC special for engineering machinery is configured. The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can achieve the monitoring of the overall working status in real time.

The Load Moment Limiter

Equipped with the comprehensive intelligent protection system is used with accuracy within 5%. The adoption of comprehensive logic and interlock control system ensures more safe and reliable operation.

Comfortable

385/95R25 tyre is equipped which ensure a stable cross-country traveling performance. Sleeper is equipped in the operator's cab providing comfortable condition for the driver.

Low Fuel Consumption

The fuel consumption is 50L/100km which could low the cost of running and maintenance. It is the lowest compared to the same class crane.

Capacity
Max. lifting capacity
100t
Dimensions
Overall length
14000mm
Overall width
2800mm
Overall height
4000mm
Axles
4
Axle distance-1,2
2080mm
Axle distance-2,3
3925mm
Axle distance-3,4
1500mm
Weight
Overall weight
46000kg
Front axle load
22000kg
Rear axle load
24000kg
Engine
Model
Cummins
Rated power
275kw/2100rpm
Rated torque
1550N·m/1100~1400rpm
Emission standard
Euro Ⅲ
Traveling
Max. traveling speed
80 km/h
Min.turning radius
10.5m
Min. ground clearance
320mm
Approach angle
21 °
Departure angle
19°
Braking distance(30km/h)
≤10 m
Max. gradeability
40%
Fuel consumption per 100km
≤ 50L
Main Performance
Min.lifting radius
3m
Boom section
6
Boom shape
U-shaped
Max. lifting moment-Base boom
3300kN·m
Max. lifting moment-Full-extend boom
1824kN·m
Length-Base boom
12.26m
Length-Full-extend boom
56m
Length-Full-extend boom+jib
71.5 /77.5 m
Outrigger span(Longitudinal/Transversal)
7.8×7.91m
Jib offset
0 ° 15 ° 30 °
Working Speed
Max. single rope lifting speed of main winch(no load)
123m/min
Max. single rope lifting speed of auxiliary winch(no load)
123m/min
Full extend/retract time of boom
480 / 500s
Full raise/lower time of boom
60 / 80s
Swing speed
0~1.6 r/min
Aircondition
HVAC in up cab
Cooling / Heating
LEAVE A MESSAGE

Submit Now!