STC200-IR2
STC200-IR2
STC200-IR2
STC200-IR2
STC200-IR2
  • STC200-IR2
  • STC200-IR2
  • STC200-IR2
  • STC200-IR2
  • STC200-IR2
  • STC200-IR2
  • STC200-IR2
  • STC200-IR2
  • STC200-IR2

STC200-IR2

20 ton Truck Crane

Max. lifting capacity:
20 t
Boom length:
33m
Overall Weight:
26400kg
  • The adoption of comprehensive logic and interlock control system ensures more safe and reliable operation

STC200-IR2 truck crane for right hand driving adopts triple gear pump, load feedback and constant power control to provide strong lifting capacity and good micro-mobility. Unique steering buffer design guarantees smooth braking operation.

Powerful Lifting Capacity

STC200-IR2 20 ton crane is equipped with four-section boom of high strength steel structure and optimized sexangle cross section with max.lifting capacity of 20t, full-extended boom length of 33m, max.lifting height including jib of 41.5m, reduce weight and improve safety significantly.

Jib mounting angles are 0°, 15°, and 30°, which ensure fast and convenient change-over between different operating conditions so as to improve working efficiency of the machine.

Excellent Traveling Performance

Double-axle drive is applied to provide good mobility. Trafficability and comfortableness under the complex road condition is improved with reliable traveling performance;

Engine has the multimode power output function, which reduces power consumption.

Intelligent Electronic Control

Self-developed controller SYMC special for engineering machinery is configured. The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can achieve the monitoring of the overall working status in real time.

The Load Moment Limiter

Equipped with the comprehensive intelligent protection system is used with accuracy within 3%. The adoption of comprehensive logic and interlock control system ensures more safe and reliable operation.

More Safe Devices

Main and auxiliary winches are equipped with over roll-out limiter to prevent over rolling-out of wire rope.

Boom and jib ends are equipped with height limiters respectively to prevent over-hoisting of wire rope.

Hydraulic system is configured with the balance valve, overflow valve and two-way hydraulic lock etc., to ensure stable and reliable operation.

Capacity
Max. lifting capacity
20t
Dimensions
Overall length
12490mm
Overall width
2500mm
Overall height
3800mm
Axles
3
Axle distance-1,2
4225mm
Axle distance-2,3
1350mm
Weight
Overall weight
26400kg
Front axle load
6850kg
Rear axle load
19550kg
Engine
Model
Cummins
Rated power
213kw/2100rpm
Rated torque
1050N·m/1200~1400rpm
Emission standard
Euro Ⅲ
Traveling
Max. traveling speed
80 km/h
Min.turning radius
10 m
Min. ground clearance
220mm
Approach angle
18 °
Departure angle
11 °
Max. gradeability
35%
Fuel consumption per 100km
≤ 35L
Main Performance
Min.lifting radius
3m
Tail swing radius of superstructure
3m
Boom section
4
Boom shape
Hexagonal
Max. lifting moment-Base boom
860kN·m
Max. lifting moment-Full-extend boom
470kN·m
Max. lifting moment-Full-extend boom+jib
313kN·m
Length-Base boom
10.6m
Length-Full-extend boom
33m
Length-Full-extend boom+jib
41.5m
Outrigger span(Longitudinal/Transversal)
5.1m × 6m
Working Speed
Max. single rope lifting speed of main winch(no load)
110m/min
Max. single rope lifting speed of auxiliary winch(no load)
110m/min
Full extend/retract time of boom
60 / 40s
Full raise/lower time of boom
60 / 50s
Swing speed
0~2 r/min
Aircondition
HVAC in up cab
Cooling
HVAC in low cab
Cooling and Heating
LEAVE A MESSAGE

Submit Now!